You must install phone USB driver to test your Android application directly on you smartphone from Flash Builder.
To run and debug Flex mobile applications from an Android device, enable USB debugging as indicated below:
On the device, follow these steps to ensure that USB debugging is enabled:
Tap the Home button to display the home screen.
Go to Settings, and select Applications > Development.
Enable USB debugging.
Connect the device to your computer with a USB cable.
Pull down the notification area at the top of the screen. You see either USB Connected or USB Connection.
Tap USB Connected or USB Connection.
If a set of options appears that includes Charge Only mode, select Charge Only and tap OK.
If you see a button for turning off mass storage mode, click the button to turn off mass storage.
(Windows only) Install the appropriate USB driver for your device. See Install USB device drivers for Android devices (Windows).
Pull down the notification area at the top of the screen.
If USB Debugging does not appear as an entry, check the USB mode as described in step 3 above. Make sure that the USB mode is not set to PC Mode.
Connect you phone usb.
Choose Install from a list of specific location (Advanced)
Click Include this location in the search:
C:Program FilesAdobeAdobe Flash Builder 4.6utilitiesdriversandroid
Restart you computer.
No comments: